Standard Features

• portable, battery powered (6 D-cell batteries) with AC adapter
• built-in speakers (2.1 Watt output)
• stereo headphone socket; stereo line out connectors
• built-in easy-to-aim antenna
• AM, FM, and SW bands in addition to WorldSpace service
• decryption and narrowcast capability
• program selection by language and category
• 30 presets and last station memory
• 1-line, 8-character LC display
• port for multimedia services
• channel/service menu
• easy to Basic Setup, Basic Operation and Learn Mode

[FM TRANSMITTERS ] [ AM & SHORT WAVE TRANSMITTERS ] [ HIGH PERFORMANCE FM EXCITERS ] [ NEW PRODUCTS ] [ TV & RADIO SYSTEMS ] [ INTERNET PRODUCTS ] [ WORLD WIDE MIF ]

 

Basic Setup

• Plug the receiver in. STANDBY indicator will be red.
• Press the ON/STANDBY button on the top-left of the unit to turn the receiver on. The STANDBY indicator light will turn off.
• If the receiver is set to any of the commercial bands (FM, AM (MW), or SW), press the green WS button.
• Adjust the antenna to the proper orientation.
• The antenna signal indicator on the display window will show up to 3 bars. Try to position to antenna for the maximum number of bars.

Basic Operation

• After turning on the receiver, positioning the antenna, and pressing the WS button, the first WorldSpace broadcaster should be audible.
• If there is adequate signal strength and no WorldSpace audio is available, try to search for the broadcasters (see next section).
• Rotate the TUNING/SELECT knob to select the broadcaster.
  * Counterclockwise to move up 1 broadcaster
  * Clockwise to move down 1 broadcaster
• As the TUNING/SELECT knob is rotated, the broadcaster ID is displayed followed by the broadcaster label, if available.

Learn Mode
This section does not apply if you are already receiving WorldSpace audio content. However, if no broadcasters can be heard and the display window shows an adequate signal strength, then you will have to force the receiver to search for the broadcasters.

• Press the Learn button underneath the display window. "LEARN?" will appear on the display window.
• Press the Learn button again while "LEARN?" is displayed.
• "LEARN 99" is displayed on the screen. The display will count down as the tuner automatically searches for the broadcasters in the WorldSpace band.
• If the search is successful, the 1st broadcaster will be heard and the rest of the broadcasters will be in memory. Follow the directions in the Basic Operations section to tune through the broadcasters.