SYSTEM SPECIFICATION PHOENIX TR2400

100 WATT MOBILE STATION

 

 

 

 

• STANDARD RADIO FUNCTIONS
  - Speech Compression by IF Peak Clipping and compression -expansion
  - Impulse Noise Blanker
  - Squelch Voice Detection
  - Security' Analogue Voice Scrambler
  - ECCM' Frequency Hopping with hop frequency cleaning
  - ALE' MIL-STD-188-141A
  - Digital Selective Calling
  
  
• ENHANCED SECURE RADIO FUNCTIONS:
  (additional to Enhanced Radio)
  
  - Digital voice Vocoder 2400bps & 800bps
  - Data & Voice encryption per hardware crypto module
  - Single tone Modem waveforms STANAG 4285, MIL-STD-188-110A
  - Freq Hopping serial tone modem
  - Data protocols Based on STANAG 5066
  - Data encryption per software crypto module
  - Antenna types Whip, Dipole or Broadband
  
  
• PERIPHERAL EQUIPMENT
  The TR 2400 is supported by a variety of peripheral devices allowing the transceiver to be
  configured to meet a wide range of requirements, these include:
  
  - 2 Wire Remote Control with a modified DT309
  - Message Terminals for Data Transfer, Message Handling and GPS
  - Power Sources
  - Batteries Li-ion or Ni-cad
  - Solar Panel
  - Hand Generator
  - Mains Supply
  - 12 V to 24 V Converter
  - Battery Charger
  - Morse Key
  - Portable Dipole
  - Vehicle Mounting Tray
  - 100W Vehicle ATU
  - Others
  

MAIN TECHNICAL CHARACTERISTICS
Frequency Range Frequency Stability Modulation Self- Test Environmental Operating Temperature Humidity ATU Tune Time Typically	1 6 to 30 MHz in steps of 10 Hz +/- 1 ppm AM, USB, LSB, CW, DIGITAL SPEECH, DATA Built-in diagnostics to module level Meets relevant requirements of MIL -STD-810 E Manpack, -30°C -+70°C 90% at +42°C Built in 2 seconds for first time tune 10 ms from memory with Whip or Dipole